Table of Contents
Advertisement
Infinity Chimp Series
Center (default):
As described in section "Fan any value using the Encoders:", the middle fixture remains unchanged,
while the values for the first and last fixtures' change most, in opposite directions. For example:
Before Fanning:
After Fanning:
Right
The last fixture in the selection order remains unchanged, while the first fixture's value changes the most:
Before Fanning:
After Fanning:
16.6.2 Fanning with Groupings
Grouping allows you to control the way that attributes are fanned to make complex patterns.
Grouping is the number of fixtures that are fanned before the fan is repeated.
For example, fanning a selection of twelve fixtures with Grouping set to three will generate four identical
fan patterns, with three fixtures each.
You may set the number of Groups from the Fan Mode toolbar.
Click on the button that reads
groups.
Infinity Chimp Series
50 %
50 %
10 %
30 %
50 %
50 %
50 %
60 %
. A new window will be shown, asking you for the number of
Grouping
116
50 %
50 %
50 %
70%
50 %
50 %
70 %
80%
50 %
90%
50 %
90%
Fig. 111: Grouping Button
Advertisement
Table of Contents
