Infinity Chimp Series
Select the Remove Option in the Record-Toolbar.
Now type the number of the group you would like to remove the Fixtures from on the console's keypad,
in example, [1] followed by [Enter]:
[Rec] [Group] [1] [Enter]
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will be
shown. Click on Remove.
Replace a Group
Before you may replace (overwrite) an entire group, you first need to select the fixtures you would like to
store in the new group.
15.5.1 Replace Fixture(s) from a Group using Group Split Widget
Open a Group Split Widget by clicking on the Groups button in one of the side menus.
Hit the [Rec] key on the consoles frontpanel.
Now, select Replace from within the Record-Toolbar.
Fig. 98: Record Toolbar - Replace
Select the Group you would like to replace with the selected fixtures.
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will open
up. Click on Replace.
15.5.2 Replace a Group using the Commandline Interface
Press the [Rec] key, followed by the [Group] key.
Select the Replace Option in the Record-Toolbar.
Now type the number of the group you would like to replace with the selected fixtures on the console's
keypad. In example, [1] followed by [Enter]:
[Rec] [Group] [1] [Enter]
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will be
shown. Click on Replace.
Infinity Chimp Series
102