Infinity Chimp Series
20 Working with Masters and Executors
Basics
"Masters" and Executors work like remote controls – you may assign different objects to Masters and
configure them independently in terms of Button and Fader configuration. These assignments are stored
for each master and are not linked to the Object the master is connected to. That means you may assign
the same single Cuelist to multiple masters and configure each master differently.
20.1.1 Difference between Masters and Master Faders
The 10 Masters on the left side of the console may be connected to any item that is supported to be
used on a Fader. These masters may be connected to any of the Global Masters, be used as Group
Dimmer Masters or for Cuelists.
The 4 Master Faders on the right side of the console may only be used for Global Masters and Group
Dimmer Masters.
Linking Objects to a Master
You can easily open up the Link Fader Dialog by tapping into the appropriates Fader Info Item of an
empty fader in the touchscreen.
Alternatively, you may press the [Link] key followed by the appropriate Masters Go or Pause / Back key.
20.2.1 Linking a Global Master
To assign any of the Global Masters (Speed Masters, Grand Masters, etc) to any of the faders, press the
[Link] key, followed by a Masters Go / Pause Button.
A window will open, asking you which object to assign. Make sure the
select the appropriate item to this master.
20.2.2 Linking Groups (Creating a Group Dimmer Master)
Group and Dimmer Masters are compared HTP, so the highest master will take precedence.
To assign any of the Fixture Groups to any of the faders, press the [Link] key, followed by a Masters Go
/ Pause Button.
Infinity Chimp Series
Global Masters
160
Fig. 162: Link Master Dialog
Tab is selected and