Infinity Chimp Series
Alter Fixture Parameters
16.3.1 Altering Intensity (Dimmer Values) Using Keypad
Dimmer Levels may be applied directly to selected fixtures using the keypad by typing [@] followed by
either [Full] or the intensity value (in percent) followed the [Enter] key.
The syntax also allows for:
[@] [Full]
[@] [@]
[..]
[@] [.] [Value]
[@] [+] [Value]
[@] [-] [Value]
[Full]
[Value A] [Thru] [Value
B]
[Value A] [Thru] [Thru]
[Value B]
Infinity Chimp Series
Will set the selected fixtures to 100%
Will set the selected fixtures to 100%
Will set the selected fixtures to 0%
Will set the selected fixtures Intensity DMX Value to
[Value]
Will increment the current value by [Value]
Will decrement the current value by [Value]
Will set the selected fixtures to 100%
Will fan the Intensity for selected fixtures from
[Value A] to [Value B] In Example:
[0] [Thru] [100] with 3 selected fixtures will
set fixture 1 to 0%, fixture 2 to 50% and fixture 3 to
100%.
Will fan the Intensity for selected fixtures from
[Value A] to [Value B] and back to [Value
A]. In Example:
[0] [Thru] [Thru] [100] with 5 selected
fixtures will set fixture 1 and 5 to 0%, fixture 2 and 4 to
50% and fixture 3 to 100%.
110