Table of Contents
Advertisement
Infinity Chimp Series
25 Hotkeys
General
[Infinity] + [Off] = Release all Cuelists, clear Programmer and reset all Fader values back to 100%
[Off] + [Cuelist] = Release all Cuelists
[Infinity] +
Preset PoolItem
linking to preset
Pressing the [Backspace] Button for longer will clear the complete commandline.
Whenever there is a keypad dialog shown on the touch screen display, the face-plate keypad may be
used to enter values. Most of the times you can also use the [+] or [-] keys to increase or decrease the
current value.
[Infinity] + [S1] = Will trigger calibration routine of internal touchscreen.
[Infinity] + [S2] = Will trigger calibration routine of external touchscreen.
[Infinity] + [S4] = May be used to restart the GUI.
Programmer
+ [Load] = For all selected fixtures load the current output values to programmer
[Infinity]
+ [Clear] = Will revert back to the last programmer state (Unclear Programmer)
[Infinity]
+ [Last] = Will deselect all fixtures
[Infinity]
+ [Next] = Will select all fixtures (of the current selection set, if applicable)
[Infinity]
[Last] + [Next] = Will select all fixtures (of the current selection set, if applicable)
[Infinity] Will show fine values in programmer and allows for fine adjustment of parameters using
the encoders.
Holding down the [Fan] key automatically switches off the fan function as soon as the button is
released.
Holding down the [Clear] hard key for longer will fully clear commandline and programmer..
Library Editor
[Infinity] Button shows fine values for default/highlight/blackout values
External Keyboard
F9 = Make Screenshot of internal Monitor (needs USB Stick to be connected to desk)
F10 = Make Screenshot of external Monitor (needs USB Stick to be connected to desk)
Infinity Chimp Series
= Copy Preset contents for all selected fixtures to programmer instead of
186
Advertisement
Table of Contents
