Table of Contents
Advertisement
Infinity Chimp Series
17.2.4 "Speed" Effect Attribute
The speed effect attribute defines how fast one complete cycle of the effect will be. Its format is CPM,
Cycles per minute.
Adjusting the effect speed increases or decreases the number of cycles it completes per minute. When
combining effects on different attributes, you can use the rate attribute to build a specific look. For
example, if you create an effect where a fixture performs a up and down movement on the tilt – moving
up during the first cycle of the effect, and down on the second, then the effect on the intensity
parameter would need to be half of the speed on the tilt parameters to only have the fixture go out
when it is changing directions of the movement.
Selecting the Speed Cell and pressing the [Set] key will open the
r Dialog
Set Effect Speed Paramete
window, which can be used to further alter values of the size, for example to randomize or fan values.
Fig. 117: Speed Attribute Options
Infinity Chimp Series
123
Advertisement
Table of Contents
