Table of Contents
Advertisement
Infinity Chimp Series
15 Working with Groups
About Groups
Groups are meant as a programming aid and are a quick way to access specific groups of fixtures.
They store information about fixture selection and selection order.
Recording Fixture Groups
To record your first group, start out by selecting fixtures 1 through 12 by using the Keypad (refer to "
Selecting Fixtures" for more information).
15.2.1 Storing a Fixture Group Using Group Split Widget
Once fixtures are selected to be a Group, open a Group Split Widget by clicking on the Groups button in
one of the side menus.
Hit the [Rec] key. Select any empty slot (an empty box with a number in the corner) to store a new
fixture Group.
15.2.2 Storing a Group Using Command Line Interface
As soon as you selected the fixtures you wish to group together, press the [Rec] keypad button
followed by the [Group] keypad button.
Now, type the number of the memory space to store the group using the keypad (for example) [1]
followed by [Enter]:
[Rec] [Group] [1] [Enter]
Merge Fixtures into Groups
Sometimes you may need to add some fixtures to a group that already exists. To do so, first select the
fixtures you would like to add to an existing group.
15.3.1 Merge Fixture(s) into Group using Group Split Widget
Open a Group Split Widget by clicking on the Groups button in one of the side menus.
Hit the [Rec] key on the consoles frontpanel.
Now, select Merge from within the Record-Toolbar.
Infinity Chimp Series
100
Fig. 95: Group Pool
Advertisement
Table of Contents
