Infinity Chimp Series
17.2.3 "Size" Effect Attribute
The effect size determines the size of the effect, relative to the base point. The base point is always at the
center of the selected waveform with the size defining how large it is. The effects size is given in percent.
For example:
You select Fixture 1 and set the Intensity level to 50%. Now you'd apply a simple effect sine waveform to
the Dimmer attribute and set the effect size to 50. The resulting effect will be alternating between 25%
intensity and 75% intensity, since the size is 50% around the base value that is set to 50%.
When combining effects, adjusting specific attributes' effect sizes may massively change the look of the
effect on stage. For example, a circle effect comprising of a sine wave on the pan and cosine form on
the tilt attribute can be modified to look like an ellipse by changing the size of either pan or tilt.
Selecting the Size Cell and pressing the [Set] key will open the
r Dialog window,
Set Effect Size Paramete
which can be used to further alter values of the size, for example to randomize or fan size values.
Fig. 116: Size Attribute Options
Infinity Chimp Series
122