Infinity Chimp Series
23.4.2 Start a Fixture using an existing Fixture Type as a template
A screen asking a few questions in regards to the new fixture will be shown. You need to specify the
Manufacturer, Fixture Type, Short Type and Fixture DMX Mode.
In order to start using an exisiting fixture as a template, select Use Existing Fixture as Template and hit the
Select Template Fixture button.
Fig. 181: Use existing as Template
A menu that allows you to pick a fixture type will appear. You may search for fixtures using the filter field
shown in the top part of the screen. Alternatively, you may select the fixture by selecting the
Manufacturer, Type and Mode.
Click on Ok when done.
Fig. 182: Select Template Fixture
The Create New Fixture Library screen is shown again. Make sure you entered a Manufacturer and Name
for the new Fixture Type and hit the Next button when done.
The Library Editor will be shown allowing you to make changes to the fixture type.
Click on Save and Close when done.
Infinity Chimp Series
179