Infinity Chimp Series
Assigning Cuelists to Masters
19.7.1 Assigning a Cuelist to a Master / Executor Using Cuelist Split Widget
To assign a Cuelist (in the Cuelist Pool) to a Master, press the [Link] key, tap on the Cuelist you would
like to assign to the master followed by the either a master's Play or Pause / Back Key or an Executor
Button.
19.7.2 Assigning a Cuelist to a Master / Executor Using Command Line Interface
Press the [Cuelist] key followed by the number of the Cuelist, you would like to assign i.e., [1]. Then
press the desired master's or Pause / Back Key or an Executor Button.
The Cuelist View (Cue Sheet) Window
The Cuelist window is used to alter Cue Timings and other. The Cuelist View may also be used as a Cue
Sheet, indicating the current, previous and next cues.
19.8.1 Opening the Cuelist View Window
Open the Cuelist View Window Using Cuelist Pool
Press the [Open] key and select a Cuelist from within the Cuelist Split Widget.
Open Cuelist View Window Using Command Line Interface
Press the [Open] key followed by the Cuelist key. Now type the number of the cuelist followed by
[Enter] – for example: [Open] [Cuelist] [1] [Enter].
Open Cuelist View Window Using Masters or Executors
To open the cuelist window for a Cuelist that is assigned to a Master, press [Open] followed by the Play
or Pause / Back Key or simply hit the Executors Button.
Open Cuelist View Window Using The Fader-Item
You may quickly open up a Cuelist view for any Cuelist by clicking into a Fader Status Item shown in the
lower left of the screen.
Infinity Chimp Series
Fig. 153: Cuelist View
150