Infinity Chimp Series
Additonal Options while recording a Cue
19.3.1 Store a Cue including timing
You may also use addiditonal command line options to store a Cue including Timing, or to give a Cue a
specific Cue Number by typing.
Timings are optional. Time will be used as a fade time, whereas Time Time will be used as the delay time
of the cue.
Recording a Cue (with Timings) to the currently selected Cuelist
[Record]
[Time] [1] [Time][Time] [2]
Recording a Cue (with Timings) using the Master or an Executor Button
[Record]
[Time] [1] [Time][Time] [2]
Directly recording to a specific Cuelist and Cue using the Numberblock
[Record]
[Time] [1] [Time][Time] [2]
Modifying the Cuelist itself
19.4.1 Naming a Cuelist
you may label any item by pressing the [Name] key on the faceplate of the console. The commandline
will read "Name". Now select the Item you would like to label.
You may also name the Cuelist using the Command Line:
[Name] [Cuelist] [1] [Enter]
19.4.2 Copy a Cuelist
Press the [Copy] key and select the Cuelist you would like to copy, followed by the destination Item.
Copying a Cuelist will create a new preset, wheras the new Cuelist has no reference to the source Item.
Changing the copy will not change the original Item and vice versa.
You may also copy the Cuelist using the Command Line:
[Copy] [Cuelist] [1] [Cuelist] [10] [Enter]
19.4.3 Move a Cuelist
Press the [Move] key. Now select the Cuelist you would like to move, followed by the destination Pool
Item.
You may also move the Cuelist using the Command Line:
[Move] [Cuelist] [1] [Cuelist] [10] [Enter]
19.4.4 Delete a Cuelist
Press the [Delete] key. Make sure
Cuelist you would like to delete.
You may also delete the Cuelist using the Command Line:
Infinity Chimp Series
[Enter]
[Masters Go / Pause Button]
[Cuelist] [1] [Cue 4] [Enter]
is selected on the delete Toolbar. Now select the
Delete Object
146