Infinity Chimp Series
16.2.2 Blind Function
With Blind turned on, any change made in the programmer will not be output live. This enables you to
prepare a look for later use, or make changes to a different cue that is not yet played back.
16.2.3 Link Values
Link Values is a convenience function that, by default, will touch all parameters within the Color or
Position attribute group as soon as one of the other attributes in the attribute group is touched. In
example: If you touch the Cyan attribute's value, the console will automatically touch Magenta and
Yellow as well. The same holds true for Hue and Saturation as well as Red, Green and Blue as well as Pan
and Tilt. This is to make sure you are not seeing any unwanted effects. This button is only shown when the
programmer is in Value mode.
However, attribute linking may be turned of, if desirable. A good example would be independent control
of Red, Green and Blue by using different faders.
16.2.4 RAW Val.
The RAW Values button will show the raw DMX Values being output instead of the captions of values that
are defined in the library.
This button is only shown when the programmer is in Value mode.
Infinity Chimp Series
109