Infinity Chimp Series
Programmer Title Bar Buttons
16.2.1 Highlight Function
Pressing the Highlight key or Softbutton temporarily sets the selected fixtures to a "Full on, open white"
state, and will set attributes like Gobo, etc to open. This function may be useful when you need to see the
beam of a fixture on stage, while focusing positions for example. It can also be used to quickly build
groups.
Highlight only changes the attribute values in the output, not in the current cue or in the Programmer,
and highlight has the third highest priority when the console determines an attribute's output value. Only
Group and Fixture Masters and the Grandmaster have a higher priority.
Highlight remains active until you press the Highlight key again. It also applies to sub-selections, meaning
you may use highlight to find a specific light by stepping through the selected fixtures using the [Last]
or [Next] key. Hightlights status is indicated by a LED above the key.
To see how the Highlight function works:
1. Select Fixtures 1 through 12
2. Press the [Highlight] key. The lights will keep their position on stage, but other attributes may
change to the highlight value set in the library.
3. Hit the [Next] or [Last] key to step through the fixtures.
Infinity Chimp Series
Fig. 101: Programmer Title Bar Buttons
108