Infinity Chimp Series
17.2.8 "Buddying" Effect Attribute
The "Buddying" attribute treats a given number of fixtures as if they were the same fixture.
For example, a tilt wave across 10 fixtures without buddying may look like this:
Fig. 123: Buddying Attribute - No Buddying
With Buddying set to a value of two, the effect will look like this:
Fig. 124: Buddying Attribute - Buddying of 2
As you can see, Fixtures 1 and 2 are being output with the same values, Fixtures 3 and 4 are as well, and
so on.
Changing how many fixtures are treated as "Buddies"
Selecting the Buddying Cell and pressing the [Set] key will open the
r Dialog
Set Effect Buddying Paramete
window, which can be used to define the amount of fixtures that will become "buddies".
Fig. 125: Defining Number of Buddies
Infinity Chimp Series
127