Infinity Chimp Series
16.3.2 Alter Parameters using the Encoders
To be able to alter fixture parameter values, Ie. set Dimmer values, you first need to select some fixtures.
Go on by selecting Fixture Group 1.
For example, in order to adjust the Dimmer level, select Intensity from the side menu. The programmer will
now alter Dimmer and Shutter values and the encoder labels will read the selected features.
Fig. 102: Encoder Labels
To have the encoders control different features within the selected group (Ie. Gobo 3 and 4), simply press
the the appropriate button within the programmer's menu bar. Only attribute groups supported by the
patched fixtures are shown.
Fig. 103: Attribute Selection
16.3.3 Alter Parameters using the ranges / slots defined in the Fixture Library
To select values directly from the library, press on the Encoder Label or the Encoder and select a value
from the screen that popped up:
Fig. 104: Select Range Dialog
Note: When the
bottom found in the lower right corner is enabled, this window will
Autoclose
automatically close after selecting one of the items.
Infinity Chimp Series
111