Table of Contents
Advertisement
Infinity Chimp Series
7.3.5 Commandline
Whenever you enter commands on the consoles front panel they are written into the Command Line
Interface.
It will also check if the command entered is a valid command. If the command is invalid (or incomplete),
the CLI will show a warning sign.
7.3.6 Commandline Syntax
In general, the Commandline Syntax needs to be entered in "Action – Source – Target" form. When no
Action is specified, the source Item will be selected.
Action
[Rec]
[Copy]
[Move]
[Link]
Commands interacting with a visual object (such as a Pool Item or a Faders Pause/Back Button) will be
executed automatically once they are syntactically correct. However, commands that do not interact
with visual elements need to be executed by pressing the [Enter] –Key.
Infinity Chimp Series
Source
[Cuelist] [5]
[Cuelist] [5]
[Cuelist] [5]
[Cuelist] [5]
[Cuelist] [2]
46
Fig. 35: Commandline
Fig. 36: Invalid CMD
Fig. 37: Valid CMD
Target
[Cuelist] [8]
[Cuelist] [8]
[Go] or [Pause / Back]
Advertisement
Table of Contents
