Dial Peer; Auto Redial; Call Complete; Headset Ringing - New Rock Technologies NRP1004 Series User Manual

NRP1004 Series IP Phone

3.3.4 Dial Peer


Press Menu > Features > Enter > Dial Peer > Enter.

Press Add and input the number and destination in the page displayed. For example: the number is
1 and the destination is 1234. Then, press Save.

Input 1# in the dial interface, you call the number 1234 in speed dial mode.

3.3.5 Auto Redial


Press Menu > Features > Enter > Auto Redial > Enter.

Enable the auto redial function using the navigation keys
set values for Interval and Times, and then press Save.

After auto redial is enabled, if the callee does not answer your call for the moment, you are
prompted whether use the auto redial function. If you press OK, the phone will call out the callee
according the Interval and Times you set.

3.3.6 Call Complete


Press Menu > Features > Enter > Call Complete > Enter.

Enable this function using the navigation keys

If the callee does not answer your call for the moment, the phone prompts you "Call Complete
Waiting number?" Press OK. When in the callee becomes idle, the phone prompts you "Call
Complete Waiting number?" (in 30s). If you press OK, the phone will call out the number
automatically.

3.3.7 Headset Ringing


Press Menu > Features > Enter > Headset Ringing > Enter.

Enable this function using the navigation keys
headset rings when the phone has an incoming call.

3.3.8 Power Light


Press Menu > Features > Enter > Power Light > Enter.

Switch on or off the power light using the navigation keys

3.3.9 Hide DTMF


Press Menu > Features > Enter > Hide DTMF > Enter.

You can choose any of the following options using the navigation keys: Disabled, All, Delay,
Last Show. If you input DTMF while in conversing, the DTMF will be displayed as you have set.
New Rock Technologies, Inc.
and . If you choose Enabled,
and .
and and insert a headset. After that, the
and .
User Manual
3-9