Phone Settings; Adjust Audio Volume; Set Ring Tone Volume And Type; Adjust Lcd Energy Saving - New Rock Technologies NRP1002/P User Manual

NRP1002/P IP Phone User Manual
7

Phone Settings

7.1 Adjust Audio Volume

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Voice Volume] item.

Enter [Voice Volume] item and you will find [Handset Volume], [Handsfree Volume] and [Headset Volume]
item.

Enter [Handset Volume] or [Handsfree Volume] or [Headset Volume] item, press Left / Right navigation
keys to adjust the audio volume for different mode.

Save the adjustment by pressing [OK] or [Save] button when done.

7.2 Set Ring Tone Volume and Type

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Ring Settings] item.

Enter [Ring Settings] item and you will find [Ring Volume] and [Ring Type] item.

Enter [Ring Volume] item and you find [Headset Volume] and [Handsfree Volume] item.

Enter [Headset Volume] or [Handsfree Volume] item, press left / right navigation keys to adjust the ring
volume.

Save the adjustment by pressing [OK] button when done.

Enter [Ring Type] item, press left / right navigation keys to change the ring type.

Save the adjustment by pressing [OK] button when done.

7.3 Adjust LCD Energy Saving

When the device is in the default standby mode.

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Screen Settings] item.

Enter [Screen Settings] item till you find [Energysaving] item.

Enter [Energysaving] item, press Left / Right navigation keys to adjust the LCD Energysaving mode.
If select 'Enabled', browse the setting parameters with up/down navigation keys and enter required

information. When done, press [Save] / [OK] button to save the changes.

The default Energysaving time is 30 seconds.
www.newrocktech.com 35/68