Table of Contents
Advertisement
NRP1002/P IP Phone User Manual
Disable Call Forward on Busy
Enable Call Forward on No
Answer
Disable Call Forward on No
Answer
Enable Blocking Anonymous Call
Disable Blocking Anonymous Call Set the feature code to dial to the server
Specific Server Type
Registration Expiration
Use VPN
Use STUN
Convert URI
DTMF Type
DTMF SIP INFO Mode
Transport Protocol
SIP Version
Caller ID Header
Enable Strict Proxy
Enable user=phone
Enable SCA
Enable BLF List
Enable DNS SRV
Keep Alive Type
Keep Alive Interval
Sync Clock Time
Enable Session Timer
Session Timeout
Enable Rport
Enable PRACK
Keep Authentication
Auto TCP
Enable Feature Sync
www.newrocktech.com
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the line to collaborate with specific server type.
Set the SIP expiration interval
Set the line to use VPN restrict route
Set the line to use STUN for NAT traversal
Convert digit and alphabet characters to %hh hex code
Set the DTMF type to be used for the line
Set the SIP INFO mode to send '*' and '#' or '10' and '11'
Set the line to use TCP or UDP for SIP transmission
Set the SIP version
Set the Caller ID Header
Enables the use of strict routing. When the phone receives
packets from the server, it will use the source IP address, not
the address in via field.
Sets user=phone in SIP messages.
Enable/Disable SCA (Shared Call Appearance )
Enable/Disable BLF List
Set the line to use DNS SRV which will resolve the FQDN in
proxy server into a service list
Set the line to use dummy UDP or SIP OPTION packet to keep
NAT pinhole opened
Set the keep alive packet transmitting interval
Time Sycn with server
Set the line to enable call ending by session timer refreshment.
The call session will be ended if there is not new session timer
event update received after the timeout period
Set the session timer timeout period
Set the line to add rport in SIP headers
Set the line to support PRACK SIP message
Keep the authentication parameters from previous
authentication
Using TCP protocol to guarantee usability of transport for SIP
messages above 1500 bytes
Feature Sycn with server
43/68
Advertisement
Table of Contents
