Table of Contents
Advertisement
NRP1002/P IP Phone User Manual
reject the call same as normal incoming call. When the waiting call is answered, the first call will be put on
hold automatically.
Second Outgoing Call
To make a second call, user may press [XFER] / [Conf] button to make a new call on the default line or press
the line key to make new call on specific line. Then dial the number the same way as making a phone call. An
alternative for making second call is to pressing DSS keys dial out from the configured keys (BLF / Speed
Dial). When user is making a second call with the above methods, the first call could be place on hold
manually first or will be put on hold automatically at second dial.
Switching between Two Calls
When there are two calls established, user will see a dual calls screen as the following picture
User can press up/down navigation buttons to switch screen page, and switch call focus by pressing [Hold] /
[Resume] button.
Ending One Call
User may hang up the current talking call by closing the audio channel or press [End] button. The device will
return to single call mode in holding state.
Join / Split Two Calls (3-way Local Conference)
6.1.2
In the dual call mode, user can join two calls into a conference call by pressing [Conf] button. When two calls
are joined, user can split them by pressing [Split] button.
www.newrocktech.com
Figure 39 - Second Incoming Call Screen
Figure 40 - Dual Calls
25/68
Advertisement
Table of Contents
