Introduction To The Phone User Interface; Keypad; Figure 4 - Keypad - New Rock Technologies NRP1002/P User Manual

NRP1002/P IP Phone User Manual
4

Introduction to the Phone User Interface

4.1 Keypad

The above picture shows the keypad layout of the device. Each key provides its own specific function. User
should refer to the illustration in this section about the usage of each key and the description in this document
about each function.
Some keys support long-pressing function. User can press and hold the key for 1.5 seconds to trigger the
long-pressed function.

Soft Keys - These four buttons provide different functions corresponding to the soft-menu displayed on
the screen.

Power key - The key will green flash when the phone reboot with power supply.

Line 1 - You could use line1 to make a call by pressing the button.
www.newrocktech.com

Figure 4 - Keypad

12/68