Set Device Language; Reboot The Device; Reset To Factory Default - New Rock Technologies NRP1002/P User Manual

NRP1002/P IP Phone User Manual

7.5 Set Device Language

When the device is in the default standby mode.

Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Language] item.

User can change the language by using the navigation keys.

7.6 Reboot the Device

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Reboot System] item.
 Press [OK] or [Enter] button, a warning message "Reboot Now?" will be prompt to user.

Press [Yes] or [OK] button to execute the reset command, or [No] to exit.

7.7 Reset to Factory Default

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Settings] item, and press [OK] or [Enter] button.

Enter [Advanced Settings] item, then input the device PIN (Default PIN is 123) to enter the interface.
 Enter [Reset to Default] item, then a warning message "Factory Reset, Continues?" will be prompt to
user.

Press [Yes] or [OK] button to execute the reset command, or [No] to exit.
www.newrocktech.com 37/68