Table of Contents
Advertisement
NRP1002/P IP Phone User Manual
8.20 PHONE / Advanced
User can configure the advanced configuration settings in this page.
Screen Configuration.
Enable Energy saving
Backlight Time
LCD Menu Password Settings.
The password is 123 by default.
Keyboard Lock Settings.
Configure Greeting Words
The greeting message will display on the top left corner of the LCD when the device is idle, which is limited to
12 characters. The default chars are 'VOIP PHONE'.
8.21 PHONEBOOK / Contacts
User can add, delete, or edit contacts in the phonebook in this page. User can browse the phonebook and
sorting it by name, phones, or filter them out by group.
To add a new contact, user should enter contact's information and press "Add" button to add it.
To edit a contact, click on the checkbox in front of the contact, the contact information will be copied to the
contact edit boxes, press "Modify" button after finished editing.
To delete one or multiple contacts, check on the checkbox in front of the contacts wished to be deleted and
click the "Delete" button, or click the "Clear" button with selecting any contacts to clear the phonebook.
User can also add multiple contacts into a group by selecting the group in the dropdown options in front of
"Add to Group" button at the bottom of the contact list, selecting contacts with checkbox and click "Add to
Group" to add selected contacts into the group.
8.22 PHONEBOOK / Cloud Phonebook
Cloud Phonebook
User may configure up to 8 cloud phonebooks. Each cloud phonebook must be configured with an URL
where an XML phonebook is stored. The URL may be based on HTTP/HTTPs or FTP protocol with or without
authentication. If authentication is required, user must configure the username and password.
To configure a cloud phonebook, the following information should be entered,
Phonebook name (must)
Phonebook URL (must)
Access username (optional)
Access password (optional)
LDAP Settings
The cloud phonebook allows user to retrieve contact list from a LDAP server through LDAP protocols.
User must configure the LDAP Server information and Search Base to be able to use it on the device. If the
LDAP server requests an authentication, user should also provide username and password.
www.newrocktech.com
54/68
Advertisement
Table of Contents
