Table of Contents
Advertisement
NRP1002/P IP Phone User Manual
Enable Page Priority
Name
Host:port
8.19 PHONE / Time/Date
User can configure the device time settings in this page.
Parameters
Network Time Server Settings
Time Synchronized via SNTP
Time Synchronized via DHCP
Primary Time Server
Secondary Time Server
Timezone
Resync Period
12-Hour Clock
Date Format
Daylight Saving Time Settings
Location
DST Set Type
Offset
Month Start
Week Start
Weekday Start
Hour Start
Minute Start
Month End
Week End
Weekday End
Hour End
Manual Time Settings
www.newrocktech.com
The voice call in progress shall take precedence over all incoming
paging calls.
Listened multicast server name
Listened multicast server's multicast IP address and port.
Table 8 - Time/Date Setting Parameters on Web
Description
Enable time-sync through SNTP protocol
Enable time-sync through DHCP protocol
Set primary time server address
Set secondary time server address, when primary server is not
reachable, the device will try to connect to secondary time
server to get time synchronization.
Select the time zone
Time of re-synchronization with time server
Set the time display in 12-hour mode
Select the time/date display format
Select the user's time zone specific area
Select automatic DST according to the preset rules of DST, or
the manually input rules
The DST offset time
The DST start month
The DST start week
The DST start weekday
The DST start hour
The DST start minute
The DST end month
The DST end week
The DST end weekday
The DST end hour
Set time manually
53/68
Advertisement
Table of Contents
