Table of Contents
Advertisement
NRP1002/P IP Phone User Manual
You can also press [Menu] / [Applications] / [Voice Massage] to enter MWI interface
When you opened voice message configuration interface, select the line to be configured with up/down
navigation keys.
Press [Edit] button to enable and edit the voice message number, when done, press [OK] / [Save] button
to save the configuration.
6.6
Do-Not-Disturb
User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls (including call waiting).
The DND can be enabled on line basis.
To quickly enable or disable the DND on all lines.
When the device is in the default standby mode.
Press [DND] button to enable DND on all line and icon
Press [DND] button again to disable DND on all line and icon
If user wishes to enable or disable DND on a specific line, user could change the DND mode in DND
configurations.
www.newrocktech.com
Figure 55 - Voice Message Screen
Figure 56 - Configure the Voice Message Number
Figure 57 - DND Enabled on All Lines
will be displayed on the screen.
will be disappeared.
31/68
Advertisement
Table of Contents
