Using The Phone; Making Phone Calls; Figure 32 - Default Line; Figure 33 - Dialing A Number Before Audio Channel Opened - New Rock Technologies NRP1002/P User Manual

NRP1002/P IP Phone User Manual
6

Using the Phone

6.1 Making Phone Calls


Default Line
The device provides 2 line services. If all lines are configured, user can make or receive phone calls on any
line. If default line is configured by user, there will be a default line to be used for making outgoing call which
is indicated on the top left corner. To change the default line, user can press up/down navigation buttons to
switch between all lines. Enable or disable default line, user can press [Menu] - > [Features] -> [Default Line]
or configure from Web Interface (Web / Phone settings / Features).

Dialing Methods
User can dial a number by,

Entering the number directly

Selecting a phone number from phonebook contacts (Refer to 6.2 Using Phonebook)

Selecting a phone number from cloud phonebook contacts (Refer to 6.3 Using Cloud Phonebook)

Selecting a phone number from call logs (Refer to 6.4 Call Logs)

Redialing the last dialed number

Dialing Number then Opening Audio
To make a phone call, user can firstly dial a number by one of the above methods. When the dialed number is
completed, user can press [Dial] button on the soft-menu, or press hand-free button to turn on the speaker or
headphone, or lift the handset to call out with the current line, or user can press line key(Configured by DSS
keys) to call out with specified line.

Figure 33 - Dialing a Number before Audio Channel Opened


Opening Audio then Dialing the Number
An alternative is the traditional way to firstly open the audio channel by lifting the handset, turning on the
www.newrocktech.com

Figure 32 - Default Line

21/68