Installer Manual Autotrol 368 / 604-606 - Operation
8.3.
To advance regeneration cycles
A
Simultaneously press
→ When the camshaft reaches the next cycle, "C#" will be displayed.
B
Repeat
and
8.4.
To cancel a regeneration
A
Press and hold
→ The controller will skip the remaining regeneration cycles and return to the service position.
It may take 1 to 2 minutes.
→ The time of day will be displayed when the controller reaches the service position.
36 / 54
and
to advance to the next cycle.
to advance through each cycle.
and
for 3 seconds during any regeneration cycle to cancel it.
Ref. MKT-IM-007 / A - 16.12.2016