4.3.
Injection flow rates
The following graphs represent the injectors flow rate as a function of the inlet pressure for the
different injector sizes.
TOTAL
Injector "F" (Peach)
Injector "H" (Light Purple)
For 9" Tanks
4.4.
Salt amount definition
The salt amount is set in kilograms of salt use for each regeneration. This setting will greatly
influence the system. Make sure this setting is aligned with your actual system size and unit#
programmed.
Ref. MKT-IM-007 / A - 16.12.2016
BRINE DRAW
For 7" Tanks
bar
psi
bar
psi
Installer Manual Autotrol 368 / 604-606 - System sizing
Injector "J" (Light Blue)
RINSE
Injector "G" (Tan)
For 8" Tanks
bar
psi
For 10" Tanks
bar
psi
17 / 54