Trunks Tab; Speed Dial Tab; Toolbar Mode; Figure 3-2 Toolbar - NEC UNIVERGE SV8100 Applications

Issue 1.0
___________________________________________________________________________________
T
S 2
OOLBAR
ECTION
This UI mode presents valuable information about the current call activity and
provides easy access to the basic operations required by the normal phone user. The
Toolbar UI layout takes up a minimum amount of space on the desktop, so as to not
interfere with the operation or viewing of other applications. An example of the Toolbar
Mode is shown below.
___________________________________________________________________________________
3 - 10
Each of these functions is further described in the Functions
section of this document.
1.4.1.5

Trunks Tab

The Trunks tab allows the user to monitor the status of
the trunk appearances that are programmed on the local
phone.
The LED image shows the trunk status using the
following colour scheme: Grey (Idle), Red (Ringing),
Green (Busy).
The Trunks tab can be hidden by clearing the
corresponding Visible tabs setting within the
Tools
1.4.1.6

Speed Dial Tab

A special tab labeled Speed Dial is included in the BLF/
DSS area. When selected, this tab displays a set of
buttons that the user has designated as speed dials.
Clicking on an entry in the Speed Dial list immediately
generates a call to the selected number.
Entries are added to the Speed Dial list through the
Directory/Contact List/Personal windows.
A right-mouse click on a Speed Dial entry opens a menu
that allows the user to Dial the selected entry or Delete
the entry from the Speed Dial list.
M
ODE

Figure 3-2 Toolbar

'
Preferences/BLF-DSS tab.
Desktop Application Startup
SV8100