Service Conditions - NEC UNIVERGE SV8100 Applications

Hide thumbs Also See for UNIVERGE SV8100:
Table of Contents

Advertisement

SV8100
___________________________________________________________________________________
S
S
2
ERVICE
ECTION
The following service conditions apply:
___________________________________________________________________________________
Desktop Applications
extension 143, and the Soft Phone extension will be 143. At this point, port 43
will no longer be available in the system because it is registered to the PC
running the Desktop Application for Soft Phone extension 143.
C
ONDITIONS
When running Desktop Applications in deskset mode for an IP phone when the
registration mode is set to automatic or manual, the user name and password
must be different than that of the IP phone.
A Soft Phone that is assigned a DSS console cannot override another IP phone.
A Soft Phone cannot override an IP phone that is assigned a DSS console.
Once a Soft Phone with a DSS console is logged in, it cannot log in with a
different user name and password.
Once a desktop is launched on one PC using a User ID and Password in
deskset or Soft Phone mode, the same User ID and Password cannot be used
on a different PC in a different mode.
In the first release of UNIVERGE SV8100, Network Address Translation (NAT) is
not supported. Because of this, any IP multiline terminal or Desktop
Applications must appear to be on the same network as the SV8100 VoIP
Interface (IPLA). For remote Desktop Applications, such as SP310 Soft Phone,
this can be achieved by using a VPN connection to the network where the
SV8100 resides.
Issue 1.0
7 - 3

Advertisement

Table of Contents
loading

Table of Contents