NEC UNIVERGE SV8100 Applications page 172

Issue 1.0 SV8100
___________________________________________________________________________________
Example 1
IP station extension 150 is using port 33 and logs in with the user name and
password assigned to extension 150. If a user wants to run a Desktop
Application for extension 150, a new user name and password must be defined.
This username and password must be assigned to an unused port. In this
example, it can be ports 41~99 and the example will use port 41 (ext 141). In
Automatic registration, the user name and password assigned to extension 141
is entered in the Desktop Configuration. In Manual registration, when the
Desktop application is launched, the user will be prompted for a user name and
password. The user would enter the user name and password assigned to
extension 141. At this point, port 41 will no longer be available in the system
because it is registered to the PC running the Desktop Application for extension
150. The key point in this example is that the Desktop Application running in
deskset mode for an IP phone cannot use the same user name and password
assigned to the IP phone because the Desktop Application connection uses a
different port.
Example 2
Digital station extension 101 is using port 1. If a user wants to run a Desktop
Application for extension 101, a user name and password must be assigned to a
port the Desktop Application will use to register with the system. In this
example, port 42 (ext 142) will be used. In Automatic registration, the user name
and password assigned to extension 142 is entered in the Desktop
Configuration. In Manual registration, when the Desktop Application is
launched, the user will be prompted for a user name and password. The user
would enter the user name and password assigned to extension 142. At this
point, port 42 will no longer be available in the system because it is registered to
the PC running the Desktop Applications for extension 101.
Example 3
IP station extension 151 is using port 34 and logs in with the user name and
password assigned to extension 151. The person that sits at extension 151 in
the office goes out of the office and wishes to run the Desktop Application as a
Soft Phone for extension 151. This is only possible if the registration mode is
manual. When the Desktop Application is launched, the user will be prompted
for a user name and password. The user would enter the user name and
password assigned to extension 151. The IP station that was 151 in the office
will show Log Off in the display, and the Desktop Application Soft Phone will
come up as extension 151. When the user is back in the office, they would press
the exit soft key and the phone will reset and prompt for a login. They would
enter the user name and password assigned to extension 151, and the IP phone
will come back up as extension 151.
Example 4
A user wishes to have a Soft Phone that is a different extension than the one
they use in the office. A user name and password can be assigned to extension
143. In Automatic registration, the user name and password assigned to
extension 143 is entered in the Desktop Configuration. In Manual registration,
when the user launches the Desktop Application, the user will be prompted for a
password. The user would enter the user name and password assigned to
___________________________________________________________________________________
7 - 2 Desktop Registration and Soft Phone Override