Chapter 7 Desktop Registration And Soft Phone Override; Registration Types - NEC UNIVERGE SV8100 Applications

Chapter 7
___________________________________________________________________________________
The Desktop Application registers with the SV8100 system as an IP (SIP) Station.
This is the case for all modes [i.e., Soft Phone, PC Assistant controlling a Soft Phone,
PC Assistant Controlling a Deskset (physical phone), PC Attendant controlling a Soft
Phone, and PC Attendant controlling a Deskset (physical phone)]. This means that a
Desktop Application that is run as a PC Assistant or PC Attendant controlling a
deskset (physical phone) uses an additional port from the system capacity. In this
scenario, two ports are in use, one for the physical extension and one for the Desktop
Application connection. If the Desktop Application is run as just a Soft Phone, or as a
PC Assistant or PC Attendant controlling a Soft Phone, only the port the Soft Phone
registers with is used.
R
S 1
ECTION
There are three types of registration; Plug and Play, Automatic, and Manual. Plug
and Play requires no user name and password. Automatic requires a user name and
password and it can be entered into the configuration so the user never has to enter it.
Manual requires a user name and password and the user is prompted to enter them.
Manual registration is required if the Soft Phone is to override an IP multiline phone
and use the same extension number. When this is done, the IP multiline phone goes
into a Log Off state and the Soft Phone comes up as the extension the IP phone used
to be. This allows a user to use the same extension whether in the office or on the
road.
If automatic or manual mode is used the Desktop Application must enter a user name
and password. If the Desktop Application is run in deskset mode (controlling a
physical phone) and the deskset phone used is an IP phone, the user name and
password used for the Desktop Application is different than that of the actual IP
phone. Below outlines examples of a SV8100 system set for Automatic or Manual
registration. The example assumes the system has 32 digital stations using ports
1~32 and eight IP stations using ports 33~40. The number plan has extensions
101~199 assigned to ports 1~99.
___________________________________________________________________________________
Desktop Applications
Desktop Registration and Soft Phone
Override
T
EGISTRATION YPES
7 - 1