Initialization Of The Scale To Printer (Optional) - Jadever JCL-3K Manual

Note: Maximum is 99 pieces. It is able to calculate the second deal when returning to zero
after the first one under the condition of more than (or equal to) 20d with stability.
Accumulation display
/MR
1) Press key
(weight, count and number of weighments)
/MR
2) Press key
the first 10 accumulation events in detail.
3) When connecting PC, printer DMP or CK, press
Note：① XX=total accumulation events； XX=the single accumulation
Accumulation clear
To clear the total accumulation data or the first 10 accumulation events, press key
TARE/
to shift the events and then press key
when the total accumulation data is deleted.

7-6 Initialization of the Scale to Printer (Optional)

G N/SET
Press
weighing mode to enter parameter setting. Press key
Step 1
the parameters and select
G N/SET
Press
TARE/
Step 2
The window of unit weight displays the type of printer. And the window of total
amount displays UNSU or init？.
to displays the total accumulation data
TARE/
or to check the total events and
key while powering on or long press
SET08
to enter the external equipment choosing. Press key
to select the type of printers. Press
(II)
PRINT/LO
M-/HI
to clear.
.
G N/SET
to output the events
Symbol " " disappears
G N/SET
key in the
TARE/
/MR
or
to start initialization.
/MR
or
to circle
/MR
or
14