Keyboard; Power Supply; Operation; Weighing - Jadever JWE User Manual

4-2-2 Keyboard

M+/MR
1) key Memory /Memory recall
MC/SET
2) key Enables weight checking function /clear previous accumulation data
MODE Cycles through kg, g, lb, lb-oz,斤, 台斤, 港斤,pcs and %（ Enable 斤、台
3) key
斤 and 港斤 under the setting mode if needed .）
TARE
4) key Tares the weight of the pan / shiftkey, moves to the left.
ZERO+
5) key Cancels tare / zero the scale (

4-3 Power supply

Please verify the local AC power source and switch the two-stage switch to the properly
before plugging into the power outlet.
Alternative power supply
1) AC 110V/220V (AC±10%)
2) (6V/4A) Internal Rechargeable Battery
Power Consumption
About 300mW, 80hrs (without backlight)
About 380 mW, 65hrs (with backlight)
Low Battery Warning
When " " appears in the upper left corner of the display window, the battery power
requires recharging. The charge lamp turns green from red when the recharging is completed
(which takes about 8 hours). Disconnect the scale from power supply when it is fully charged.
Note: Battery is to replaced only by an authorized service dealer .Risk of explosion can occur
if replaced with the wrong type or connected improperly.
5. Operations

5-1 Weighing

Begin with no load on the scale, the display reading zero .Place item(s) to be weighed on the
scale. The display shown is 1000g, gross weight.
→
(within 2% of max.capacity)
JWE
/ increase values.
4