Overview Of A Communication Control - Panasonic minas a series Operating Manual

Overview of a Communication Control Software PANATERM
How to Connect
D V O P 1 1 6 0
(For PC-98 series)
D V O P 1 9 6 0
( D O S / V )
ID MODE SET
RS232C cable
IM SP G
NET
*Note
L 1
SER
L 2
L 3
I/F Connect to
r
CN SER.
t
P
B 1
B 2
Setup disc of DVOP2320
SIG
U
V
PANATERM
W
Installing PANATERM on a hard disc
<Notes>
1.The memory capacity of the hard disc should be 15MB or more.
2.Install PANATERM with setup discs, otherwise the software does not work.
Installation Procedure
1) Turn on your personal computer. Start Windows95 (or 98). (Note: if there is any application program on, close
all of them.)
2) Insert the PANATERM Setup Disc 1 into the floppy disc drive.
3) Start Explorer, and switch to (select) the floppy disc drive. (For the procedure for starting the Explorer pro-
gram, see the instructions for Windows.)
4) Double click on "Setup.exe" (PANATERM Setup program will start).
5) Click on OK to start the setup program.
6) Keep the operation according to the guide of the setup program.
7) Click on Start installing? to start the setup routine.
8) Confirm an message "Setup completed". Then click on OK .
9) Close all the applications. Then restart Windows. PANATERM will be added to the program menu.
<Note>
* Do not connect to CN NET. Otherwise an error
message meaning that PANATER cannot detect the com-
munication port or driver will appear.
- App. 67 -