Details Of Parameters - Panasonic minas a series Operating Manual

Details of Parameters

Parameters for Function Selection
PrNo. P a r a m e t e r
0 0 Axis address
• With the mains power ON, the current
value of RSW ID (0 to F) on the LED
touch panel is downloaded to the
driver as the value of this parameter.
• The value of this parameter cannot be
modified by other means than the ro-
tary switch (RSW) ID.
0 1 Initial LED
s t a t u s
Reading (pulse count) of the
position error counter
Unit: pulse
+ : generates
CCW-torque
– : generates
CW-torque
Value
0 ~ If multiple axes are used, it is necessary for the river to identify
15 the current axis that is accessed by the host (e.g. PC). You
[1] can identify axis address by number with this parameter.
0 ~ 2 You can select the type of information to be displayed initially
[1] on the 7-segment LED at power on.
Power ON
Pr01 value
0
Motor speed
Unit : r/min.
+ : runs in CCW
– : runs in CW
- App. 30 -
Default setting is shown by [
F u n c t i o n
ID MODE SET
IM SP
1
Motor torque
Unit : %
+ :generates
CCW-torque
– : generates
]
G
F l a s h e s ( a b o u t t w o
seconds) during the
initializing process
2
CW-torque