Panasonic minas a series Operating Manual page 140

Display of I/O signals status
Display the status of control (input) and output signals via the CN I/F connectors. Use this information for checking
the wiring connections.
•
Pressing LEFT button will move the decimal point in blinking.
1) Input/output selection mode
2) Signal selection mode
Pressing UP
button will scroll
downward (in the
arrow direction).
Active
Inactive
Signal No. (hexadecimal digit 0 to 1F)
Input signa
Output signal
(Decimal point placed on the
right side: Signal selection mode)
(Decimal point placed on the left side:
Input/output selection mode)
The lowest No. of input signal
The highest No. of input signal
The lowest No. of output signal
The highest No. of output signal
- App. 59 -