Elnec JetProg User Manual page 47

• Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49,
87x50 series
• Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx,
89Sxxx, 89LVxxx, all manufacturers, Philips 87C748..752
series
• Microcontrollers
KB/KC/KD/KT/KR/...
• Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny series
• Microcontrollers Microchip PICmicro: PIC12Cxxx, PIC16C5x,
PIC16Cxxx, PIC17Cxxx, PIC18Cxxx series
• Microcontrollers Motorola: 68HC11 series
• Microcontrollers National: COP8xxx series
• Microcontrollers NEC: uPD78Pxxx series
• Microcontrollers
SX28xxx series
• Microcontrollers SGS-Thomson: ST6xx series
• Microcontrollers TI: MSP430 series
• Microcontrollers ZILOG: Z86xxx series
Notes:
• Devices marked * are obsolete, programming with additional
module
• For all supported devices see actual Device list on
www.elnec.com.
I.C. Tester
• TTL type: 54,74 S/LS/ALS/H/HC/HCT series
• CMOS type: 4000, 4500 series
• static RAM: 6116 .. 624000
• user definable test pattern generation
Package support
• package support includes DIP, PLCC, SDIP, SOIC, PSOP,
TSOP, TQFP and other (ask for package converters)
• support all devices in DIP with default ZIF-48 socket
• support devices in non-DIP packages up to 48 pin with
universal adapter (optional accessory, to be ordered
separately)
• compatible with third-party adapters for non-DIP support
Programming speed
Note. These times strongly depend on PC speed, LPT port
type and operating system free resources. Therefore are given
values of two different PC configurations for comparison.
Device
27C010
AT29C040A
AM29F040
PIC16C67
Intel 196
Scenix (Ubicom):
Operation
programming and verify
programming and verify
programming and verify
programming and verify
47
LabProg+
series: 87C196
SX18xxx, SX20xxx,
Time A Time B
39 sec 32 sec
110 sec 90 sec
165 sec 139 sec
46 sec 41 sec