Warranty Terms - Elnec JetProg User Manual

ELNEC s. r. o.

Warranty terms

The manufacturer, ELNEC s.r.o. Presov, Slovakia, gives a
guarantee on failure-free operating of the programmer and all
its parts, materials and workmanship for one-year (MEMprog,
T51prog, 51&AVRprog, PIKprog+, PIKprog and SEEprog) or
three-year (JetProg, BeeProg, LabProg+, SmartProg,
PREPROM-02aLV) from the date of purchase. This warranty is
limited to 25,000-cycles on DIL ZIF socket or 10,000-cycles on
other ZIF sockets). If the product is diagnosed as defective,
ELNEC s.r.o. or the authorized repair center will repair or
replace defective parts at no charge. Parts used for
replacement and/or whole programmer are warranted only for
the reminder of the original warranty period.
For repair within the warranty period, the customer must prove
the date of purchase.
This warranty terms are valid for customers, who purchase a
programmer directly from Elnec company. The warranty
conditions of Elnec sellers may differ depending on the target
country law system or Elnec seller's warranty policy.
The warranty does not apply to products that are of wear and
tear or mechanically damaged. Equally, the warranty does not
apply to products opened and/or repaired and/or altered by
personnel not authorized by ELNEC, or to products that have
been misused, abused, accidentated or that were improperly
installed.
For unwarrantable repairs you will be billed according to the
costs of replacement materials, service time and freight.
ELNEC or its distributors will determine whether the defective
product should be repaired or replaced and judge whether or
not the warranty applies.
Please also see Troubleshooting section.
Manufacturer:
: ELNEC s. r. o., Post 5, P. O. Box 22, SK - 08005 Presov, Slovakia
: +42151/77 34 328, 77 31 007, fax 77 32 797
www.elnec.com, (nospam version) elnec at elnec dot com
164