Elnec JetProg User Manual page 120

ELNEC s. r. o.
manufacturer name and/or device number in a search box (use
a key <Space> as a separation character) and press <Enter>
or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel
device selection without affecting the currently selected device.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) that supported this
device. You can find here package information and other
general information about current device too.
Select device ... / Only selected manufacturer
This window allows selecting the desired device type by
manufacturer. First select a required manufacturer in
Manufacturer box using mouse or cursor keys. It will cause a
list of selected manufacturer devices will be displayed.
Device can be select by double click on a line from list with
desired manufacturer name and device number or by entering
device number in a search box (use a key <Space> as a
separation character) and press <Enter> or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel
device selection without affecting the currently selected device.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
Device / Select from default devices command.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) that supported this
device. You can find here package information and other
general information about current device too.
Device / Select EPROM /Flash by ID
Use this command for autoselect an EPROM or Flash as
active device by reading the device ID. The programmer can
automatically identify certain devices by the reading the
manufacturer and the device-ID that are burnt into the chip.
This only applies to EPROM or Flash that supports this feature.
If the device does not support a chip ID and manufacturer's ID,
120