Products Configuration - Elnec JetProg User Manual

Free additional services:
• free technical support (phone/fax/e-mail).
• free lifetime software update via Web site.
Free software updates are available from our
Internet address www.elnec.com.
We also offer the following new services in our customer
support program: Keep-Current and AlgOR.
• Keep-Current is a service by which ELNEC ships to you the
latest version of the control program for programmer and the
updated user documentation. A Keep-Current service is your
hassle-free guarantee that you always have access to the
latest software and documentation, at minimal cost.
• AlgOR (Algorithm On Request) service allows you to receive
from ELNEC software support for programming devices not
yet available in the current device list.
Note: We don't recommend use programmers LabProg+,
PREPROM-02aLV, MEMprog, 51&AVRprog, PIKprog and
SEEprog for In-circuit programming. See FAQ on site
www.elnec.com.

Products configuration

Before installing and using your programmer, please carefully
check that your package includes all next mentioned parts. If
you find any discrepancy with respective parts list and/or if any
of these items are damaged, please contact your distributor
immediately.
JetProg, BeeProg, LabProg+, SmartProg,
PREPROM-02aLV, MEMprog, T51prog and
PIKprog+ programmer configuration
• programmer
• cable with two 25 pin, D-type connectors for connecting the
programmer to the PC
• USB cable for connecting the programmer to the PC (only for
BeeProg)
• external power supply (suitable for respective programmer)
• diagnostic POD for selftest of programmer
• cap for ZIF socket (anti-dust cover)
• this User's manual
• CD with the control program and additional files
10
ELNEC s. r. o.