Elnec JetProg User Manual page 143

Pressing key <Enter> or button OK initiates scanning for
programmer by set parameters. There is same activity as at
start the control program. The command clears a list of default
devices without the current device, if the new selected
programmer supports this one.
This setting is saved to disk by command Options / Save
options.
Options / Handler
In dialog Handler a Handler type and Handler communication
parameters can be set. Handler is an external device for
special control of device operations in control program. When
None Handler is selected, this means default state of control
program, i.e. device operations are controlled directly by user
otherwise control program is in special mode, when device
operations are controlled automatically with co-operation with
Handler.
Dialog Handler contains following items:
Selected Handler
Search at port
for a requested Handler.
Pressing key <Enter> or button OK initiates scanning for
Handler by set parameters. If selected Handler type is None,
no Handler scanning will be processed. Current Handler
settings are saved to configuration file by command Options /
Save options or when control program is closed.
Handler is not available for sale.
Options / Module options
This option is used for multiple socket programmers for
defining MASTER socket and activity of each socket.
MASTER socket group box allows user to set socket which is
preferentially
Enable/Disable socket checkbox array allows user to set
enabling and disabling of each socket individually. Disabled
sockets are ignored for any device operation.
Options / Automatic YES!
This command is used for setting Automatic YES! mode. In
this mode isn't necessary to press "YES!" labeled button to
repeat last activity. You just put a device into ZIF socket and
program automatically detects an insertion of a new device
and last operation will be repeated automatically. An insertion
of device into ZIF is displayed on the screen. Repeated
select wished Handler type.
select a COM port, which will be scanned
used for device
143
Software
reading operation.