File - Elnec JetProg User Manual

List of hot keys
<F1>
<F2>
<F3>
<F4>
<F5>
<Alt+F5>
<F6>
<F7>
<F8>
<F9>
<Alt+Q>
<Alt+X>
<Ctrl+F1>
<Ctrl+F2>
<Ctrl+Shift+F2>

File

This submenu is used for source files manipulation, settings
and viewing directory, changes drives, changes start and finish
address of buffer for loading and saving files by binary,
MOTOROLA, MOS Technology, Intel (extended) HEX,
Tektronix, ASCII space, JEDEC, and POF format. The menu
commands for loading and saving projects are located in this
submenu too.
File / Load
Analyse file format and loads the data from specified file to the
buffer.
MOTOROLA, MOS Technology, Tektronix, Intel (extended)
HEX, ASCII space, JEDEC and POF). The control program
stores a last valid mask for file listing. You can save the mask
into the config. file by command Options / Save options.
Checking the check box Automatic file format recognition
tells program to detect file format automatically. When program
can't detect file format from one of supported formats, the
binary file format is assumed.
Help
Save
Load
Edit
Select/default
Select/manual
Blank
Read
Verify
Program
Exit without save Terminates the PG4UW
Exit and save
Erase
You can choose
Calls Help
Save file
Load a file into the buffer
Viewing/editing of buffer
Target-device selection from
10 last selected devices list
Target-device selection by
typing device/vendor name
Blank check
Reads device's content into
the buffer
Compares contents of the
target device with the buffer
Programs target device
Terminates the PG4UW and
saving settings too
Displays additional informa-
tion about current device
Fill's the buffer with a given
value
Fill's the buffer with random
values.
the format
114
ELNEC s. r. o.
desired (binary,