Technical Specification - Elnec JetProg User Manual

Technical specification

HARDWARE
Socket and control of pins:
• DIL/ZIF socket (300mil)
• each pin is possible to set in position Low and Pull-up
• from each pin is possible to read
• support of Low Voltage devices
For works with serial EEPROM are used nearest 8 pins to
lever, unused pins are not connected.
DEVICE SUPPORT
• EEPROM IIC (24Cxxx)
• EEPROM Microwire (93Cxxx)
• EEPROM SPI (25Cxxx)
• specially devices (digital thermometers, ...)
Note:
• For all supported devices see actual Device list on
www.elnec.com.
SOFTWARE
• Algorithms:
algorithms are used.
• Algorithm updates: software updates are available approx.
every 2 weeks, free of charge.
• Main features: revision history, session logging, on-line help,
device and algorithm information
Device operations
• standard:
• blank check
• read
• program
• verify
• checksum
Buffer operations
• view/edit, find/replace
• fill/copy, move, byte swap, word/dword split
• checksum (byte, word)
• print
only manufacturer
108
ELNEC s. r. o.
approved or certified