Technical Specification - Elnec JetProg User Manual

Technical specification

HARDWARE
Socket, pin drivers and DACs
• 40-pin DIL ZIF (Zero Insertion Force) socket accepts both
300/600 mil devices up to 40-pin
• TTL driver provides H, L and read for all pins
DEVICE SUPPORT
• microcontrollers Microchip PIC series: 12xxx, 14xxx, 16xxx,
8/16/18/28/40 pins
• Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx,
93Cxxx series
Notes:
• Serial EEPROMs programming is performed little bit slowly.
• For all supported devices see actual Device list on
www.elnec.com.
SOFTWARE
• Algorithms:
algorithms are used.
• Algorithm updates: software updates are available approx.
every 2 weeks, free of charge.
• Main features: revision history, session logging, on-line help,
device and algorithm information
Device operations
• standard:
• blank check
• read
• program
• verify
• erase
• configuration and security bit program
• security:
• ID byte check
• special:
• auto device serial number increment
Buffer operations
• view/edit, find/replace
• fill/copy, move, byte swap, word/dword split
only manufacturer
103
approved or
PIKprog
certified