Table of Contents
Advertisement
7.2.
LEAKAGE CURRENT: RECORDING
Before starting a recording we recommend the user checks that real time values are
correct.
For this purpose follow the measurement procedure described in paragraph 7.1.
In addition it's fundamental that Instrument settings correspond to the accessories in use.
For this we recommend the user checks the instrument's setting before executing an AUX
recording.
To this purpose please check the RECORDER CONFIG settings.
MENU:
to enter in the MENU mode and change the instrument settings. It's
not possible to enter the configuration MENU during a recording or an
energy measurement.
START/STOP: to record the selected parameters according to the instrument's
settings (see chapter 10).
7.2.1. AUX Basic setting: RECORDER CONFIG
Place the rotary switch in the AUX position, press the MENU key, using the F1/F2 keys
select the RECORDER CONFIG item and press the ENTER Key.
It's not possible to enter the MENU during a recording or a Real Time
Energy measurement.
Inside RECORDER CONFIG mode it's possible to execute the following operations:
• Setting of Start/Stop recording mode (AUTO or MANUAL) and the date/hour of
Start/Stop (in AUTO mode).
• Setting of Integration Period (see paragraph 16.13.1) selectable from 5 sec to 60 min
Press ENTER to confirm each setting or ESC to escape from setting and exit from
RECORDER CONFIG menu.
The various pages of the "RECORDER CONFIG" can be schematised as follows overleaf:
CAUTION
MENU GENERAL
SAFETY TEST MEMORY
ANALYZER MEMORY
RESET
ANALYZER CONFIG
RECORDER CONFIG
CONTRAST
DATE&TIME
LANGUAGE
↓
↑
Page 59 of 131
VR2250
Advertisement
Table of Contents
