MARTINDALE VI13700G Instruction Manual

VI13700g voltage ind instruct rev5:instruct.qxd
VOLTAGE INDICATOR
GENERAL SAFETY INFORMATION: Always read before proceeding.
Warning
These instructions contain both information and warnings that are
necessary for the safe operation and maintenance of this product. It is recommended that you
read the instructions carefully and ensure that the contents are fully understood. Failure to
understand and to comply with the warnings and instructions can result in serious injury,
damage or even death.
In order to avoid the danger of electrical shock, it is important that proper safety measures
are taken when working with voltages exceeding 30V AC RMS, 42V AC peak or 60V DC.
This product must only be used by a competent person capable of interpreting the results
under the conditions and for the purposes for which it has been constructed. Particular
attention should be paid to the Warnings, Precautions and Technical Specifications. Always
check the unit is in good working order before use and that there are no signs of damage to
it. Do not use if damaged.
Where applicable other safety measures such as use of protective gloves, goggles etc. should
be employed.
Remember: Safety is no accident
Warning
Before use check the unit for cracks or any other damage. Make sure the unit is free from dust,
grease and moisture. Also check any associated leads and accessories for damage. Do not use
if damaged.
Verify the testers operation by using a known voltage before and after each use (e.g. the
PD690 proving unit). NB: The Martindale PD240 is not suitable for use with this voltage
indicator. Whilst verifying the unit, it is important to move the test lead around, and
ensure that the VI13700G display remains stable. This is necessary to confirm the
integrity of the cable.
10/03/2009
VI13700G
11:56 Page 1
I
NSTRUCTION
M
ANUAL
MARTINDALE
E L E C T R I C
Trusted by Professionals