Table of Contents
Advertisement
5.4.
RESET
This option re-establishes the initial settings of the instrument in ANALYSER function.
The "Current Range" parameter it is not modified by the reset command.
The initial settings of the instrument consist of:
ANALYZER CONFIG:
System:
Frequency:
Current range:
Clam type:
Transforming ratio of voltmet transformers:
Password:
RECORDER CONFIG:
Start:
Stop:
Integration period:
Recording of harmonics:
Recording of Voltage anomalies (Sag and Surge):
Voltage Reference for Sag and Surge detection:
Upper Limit for Sag and Surge detection:
Lower Limit for Sag and Surge detection:
Selected voltages:
Selected voltage harmonics:
Selected currents:
Selected current harmonics:
CO-GENERATION:
Powers, Pf and cosϕ selected:
Energies:
The RESET command will not erase the instrument's memory.
MANU (the recording is started
at 00 sec mark on clock after pressing
the START/STOP key)
THD, 01, 03, 05, 07
THD, 01, 03, 05, 07
Page 13 of 131
VR2250
SINGLE
60Hz
not modified
STD
1
OFF
MAN
15min
ON
ON
230V
6%
10%
V1
I1
OFF
P1
Q1i
Q1c
S1
Pf1
DPf1
Ea1
Eri1
Erc1
Advertisement
Table of Contents
