Serial Port N Configuration; Serial Port 1 Configuration - IEI Technology tKINO-ULT3 User Manual

5.3.3.1 Serial Port n Configuration

Use the Serial Port n Configuration menu (BIOS Menu 6) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Advanced

Serial Port 1 Configuration

Serial Port
Device Settings
Change Settings
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 6: Serial Port n Configuration
5.3.3.1.1 Serial Port 1 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

IO=3F8h; IRQ=4

IO=3F8h; IRQ=3,
4, 11
Page 80
[Enabled]
IO=3F8h; IRQ=4
[IO=3F8h; IRQ=4]
Disable the serial port
Enable the serial port
D
EFAULT
Serial Port I/O port address is 3F8h and the
D
EFAULT
interrupt address is IRQ4
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3, 4, 11
tKINO-ULT3 SBC
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit