IEI Technology tKINO-ULT3 User Manual page 117

tKINO-ULT3 SBC

Internal Graphics [Enabled]
Use the Internal Graphics option to enable or disable the internal graphics device.

Auto

Disabled

Enabled D

DVMT Pre-Allocated [256M]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
then only be used as graphics memory, and is no longer available to applications or the
operating system. Configuration options are listed below:

32M

64M

128M

256M

512M

DVMT Total Gfx Mem [MAX]
Use the DVMT Total Gfx Mem option to select DVMT 5.0 total graphic memory size used
by the internal graphics device. The following options are available:

128M

256M

MAX
The internal graphics device is automatically detected
and enabled.
Disable the internal graphics device.
Enable the internal graphics device. The following
EFAULT
options/submenu appear with values that can be
selected:
DVMT Pre-Allocated
DVMT Total Gfx Mem
LCD Control
D
EFAULT
D
EFAULT
Page 103